CPCS/ Plant Courses
From Excavator to Slinger SignallerBook your course today. Call 01227 903904 or 07545 637577
Excavator 360 Below 10 tonnes Experienced operator
Overview
This course is for plant operatives whom have 12months site experience in operating a 360 excavator.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aim
To provide the candidate with a thorough understanding of both the theory and practical test for the excavator 360 (below 10 tonnes). Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available through out the UK at our training centres- there may be opportunities to deliver this at the workplace.
Excavator 360 Below 10 tonnes Novice operator
Overview
This course is for plant operatives whom less than 12 months site experience in operating a 360 excavator.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aim
To provide the candidate with a thorough understanding of both the theory and practical test for the excavator 360 (below 10 tonnes). Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Excavator 360 Above 10 tonnes Experienced operator
Overview
This course is for plant operatives whom have 12 months site experience in operating a 360 excavator.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aim
To provide the candidate with a thorough understanding of both the theory and practical test for the excavator 360 (below 10 tonnes). Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Excavator 360 Above 10 tonnes Novice operator
Overview
This course is for plant operatives whom less than 12 months site experience in operating a 360 excavator.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aim
To provide the candidate with a thorough understanding of both the theory and practical test for the excavator 360 (below 10 tonnes). Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Telehandler Experienced
Overview
This course is for plant operatives whom have at least 12 months site experience in operating a telescopic handler
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the Telescopic handler. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Telehandler Novice
Overview
This course is for plant operatives whom have less than 12 months site experience in operating a telescopic handler
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the Telescopic handler. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Forward Tipping Dumper Experienced
Overview
This course is for plant operatives whom have a minimum of 12 months site experience in operating a forward tipping dumper.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the forward tipping dumper. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost, but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Forward Tipping Dumper Novice
Overview
This course is for plant operatives whom have less than 12 months site experience in operating a forward tipping dumper.
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the forward tipping dumper. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost, but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Ride on Roller Experienced
Overview
This course is for plant operatives whom have a minimum of 12 months site experience in operating a ride on roller
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the ride on roller. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost, but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Ride on Roller Novice
Overview
This course is for plant operatives whom have a less than 12 months site experience in operating a ride on roller
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the ride on roller. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost, but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Slinger Signaller Experienced
Overview
This course is for plant operatives whom have at lest 12 months site experience in operating a Slinger Signaller
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the Slinger Signaller. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.
Slinger Signaller Novice
Overview
This course is for plant operatives whom have less than 12 months site experience in operating a Slinger Signaller
The candidate will be provided with the knowledge and skills that help them pass both the theory and practical tests
Aims
To provide the candidate with a thorough understanding of both the theory and practical test for the Slinger Signaller. Our trainers will give their full guidance to the Candidates on how to answer the theory test questions and revision materials that will enable them to complete the tests with confidence.
Certification
On successful completion the candidate will be a trained operator for 2 years with NPORS trained operators’ qualification.
During the two years it is advisable to upgrade their qualification to NVQ level to a competent operator Blue card.
Candidate entry requirements
It is important that all Candidates have a good understanding of spoken and written English and have the operating experience as described in the ‘Introduction’ of this course overview. Candidates must have passed the CSCS H&S touch screen test within two years of taking the technical test.
It is important that all delegates have a good understanding of spoken and written English.
Our Delivery
The course is structured with a good level of practical training, coupled with classroom-based training. This will give the candidate the training required to prepare them ready for the practical and theory tests.
This course will have a large element of practical hands-on training. The delegate will also attend classroom-based training to prepare them for the CPCS theory test. All delegates are provided with and are encouraged to read the CPCS theory test questions and revision notes where provided.
Course requirements
Candidates should be in possession of all PPE; This can be supplied at additional cost, but prior ordering will be required before the course. Candidates should also be aware that a photograph will be taken on the day for their cards. Identification will be required
Location
Available throughout the UK at our training centres- there may be opportunities to deliver this at the workplace.